ST37x Operator’s Manual Transport - 53
Haul
Unload
1. Prepare trailer and ramps for unloading.
2. Remove tiedowns.
3. Start engine.
4. Disengage parking brake.
5. Pull boom lift control to raise boom off ground, but keep it low.
6. Adjust throttle to low speed and slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury:
• Load and unload trailer on level ground.
• Attach trailer to vehicle before loading or unloading.
• Only operate unit from operator platform.
• If unloading from tilt-bed trailer, be prepared for trailer to tilt.
To Next Page
Loading...
Need help?
General
