Transport - 50 ST37x Operator’s Manual
Lift
Lift
Points
Lifting points are identified by lifting decals. Lifting at other points is unsafe
and can damage machinery.
Procedure
Use a hoist capable of supporting the
equipment's size and weight. See
“Specifications” on page 97 or measure and
weigh equipment before lifting.
Use three lift points as shown.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury: Only lift unit without attachment installed.
t54om005h.epst54om005h.eps
To Next Page
Loading...
Need help?
General
