DITEC GOL4 - GOL4 C Remote Code Registration; Registering Code via CH1;CH2 Buttons

www.ChronoRemoteControl.com
Registration of a code on a GOL4C remote (equivalent to coding using the dip-
switches of the old BIXLS2 model):
1) Simultaneously press buttons CH1 and CH2 of a new remote control and hold
for 5 seconds. The red LED turns on.
2) Within 10 seconds, copy the code made of 10 numbers using the CH1 button as
0 (OFF) and CH2 button as 1 (ON).
3) Once the 10 numbers are inserted, the LED blinks 3 times indicating the end of
the registration procedure.
4) Try the new remote control.