To Next PageTo Next PageWhy is my DITTING Grinder not grinding fine enough?
If your DITTING Grinder isn't grinding fine enough, the grinding discs might be worn out or not correctly aligned. In either of these cases, contact your supplier.
How to fix irregular grinding in my DITTING Coffee Grinder?
To address irregular grinding with your DITTING Coffee Grinder, check the grinding discs for wear. Replace them if necessary.
What to do if my DITTING Grinder is making noise but not grinding?
If your DITTING Grinder is making noise but not grinding, it could be due to a clogged spout or a grinding degree that's too fine. Try setting the grinding degree to the 'coarsest grind' and start the grinding process to clear it. After that, set the grinding degree to your desired setting. If the issue persists, a foreign object may have entered the grinding mechanism; in this case, contact your supplier.
What to do if my DITTING Grinder is not grinding and making noise?
If your DITTING Grinder isn't grinding and is making noise, first ensure the power plug is properly inserted into a working socket. Next, check that the grinder is switched on by setting the on/off switch to the **I** position (only applicable to models KFA 1203 / 1403 and KFA 1403 Industrial). Also, verify if the thermal overcurrent circuit-breaker has tripped and push it back in if necessary. If it repeatedly trips, or if the electrical fuse has tripped, contact your supplier after checking and restoring or replacing the fuse and reducing the electrical load on the circuit.
What to do if my DITTING Coffee Grinder cannot be switched on?
If your DITTING Coffee Grinder won't switch on, you should: * Check the power cable. Ensure it is properly connected and that the building fuses are in working order. * Reset the circuit breaker. * Allow the machine to cool down.
Why is my DITTING Coffee Grinder jamming and the motor not starting?
General| Brand | DITTING |
|---|---|
| Model | KR 1203 |
| Category | Coffee Grinder |
| Language | English |
