EasyManua.ls Logo

Dixie Chopper XW2500-60 - User Manual

Dixie Chopper XW2500-60
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
STANDARD PRODUCTION
MANUAL
MODELS COVERED: LX, X, XF, XW, AND XWF

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Dixie Chopper XW2500-60 and is the answer not in the manual?

Summary

SECTION 1 INTRODUCTION

General Safety Suggestions

Safety guidelines for operating the Dixie Chopper mowing machine.

Routine Maintenance

Daily Checks

Routine checks to be performed daily on the mower for proper operation.

VEHICLE IDENTIFICATION NUMBER (VIN) LOCATIONS

SECTION 3 WARRANTY

Safety Precautions

Important safety warnings and advice for mower operation and maintenance.

Starting Instructions

Step-by-step guide on how to safely start the mower engine.

SECTION 3 MAINTENANCE & SERVICE

SECTION 4 MOWING MACHINE CONTROLS

Right and Left Motion Control Levers

How to operate the levers for steering, forward, and reverse motion.

Operating Your Mowing Machine

Overview of operating the machine, including safety interlocks and engine operation.

SECTION 5 OPERATING YOUR MOWING MACHINE

Starting Engine

Procedure for starting the mower engine safely and correctly.

Stopping Engine

Method for safely stopping the mower engine, including emergency procedures.

Throttle Control

How the throttle control regulates engine RPM for optimal performance.

Choke Control

Correct use of the choke for starting and warm-up to prevent engine stalling.

Correct Transmission Operation

Proper use of motion control levers for forward and reverse movement.

SECTION 5 MOWING MACHINE

Mowing Speed

Guidelines for selecting appropriate mowing speed for different conditions.

Mowing Height

Recommendations for setting the mower deck cutting height.

SECTION 6 MOWER

SECTION 6 MOWER (CONTINUED)

Dixie Chopper XW2500-60 Specifications

General IconGeneral
Horsepower25 HP
Engine Size747cc
Cutting Width60 inches
Deck TypeFabricated
Blade Tip Speed18, 500 fpm
Cutting Height1.5 - 5 inches
Fuel Capacity12 gal
Warranty3 years

Related product manuals