EasyManua.ls Logo

Dixon ZTR - Specifications; Mower Specifications

Dixon ZTR
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
KODIAK™ DIESEL
CHASSIS: 11 GA - rectangular tube
SEAT: Designed for operator comfort by use of high-density closed
cell foam padded back and arm rests, upholstered with
Cordura
TM
water-repellent fabric. Seat is adjustable fore
and aft. Mounted on operator suspension system.
MOWER DECK: Made of 11 GA and 7 GA fabricated welded construction with
multiple 1/4” and 3/8” reinforcement ribs. Three blades
combine for a 52” cut width. Cut height approximately 1.5” to
5” via 18 position lift handle with foot assist.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear
12cc pump with fans and TJ230 wheel motor.
ENGINE: The mower is powered by a 20 HP Yanmar Diesel twin
cylinder engine, overhead valve, liquid cooled, full pressure
lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES: Front 13 x 6.5 x 6 smooth tread (16-21 lbs)
Rear 23 X 10 X 10 Turf Master (8-14 lbs)
CAPACITIES: Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter &
Dixon Blue
TM
15w50 Synthetic Hydrostatic Fluid
Engine - 2 qts. SAE 10W30 (with filter)
Radiator - 50/50 mix
DIMENSIONS: Width 47” outside rear wheel measurement
(approximate) Height 46.5”
Length 79” hitch tab to front
Weight 1135 lbs.

Related product manuals