CARE AND MAINTENANCE
44
LEVELING THE DECK:
1. Set the tire pressure on all four tires.
2. Move the mower to a hard, level surface and rotate
front casters in the direction of forward travel.
3. Put the mower deck in the mid-range cut height
position.
4. Rotate the 2 outer blades so the blade tips point
outboard.
5. Turn front adjuster nut(s) to level deck side to side.
6. Rotate all 3 blades until they run fore and aft.
7. Turn rear adjuster nut(s) until deck is level to 1/4”
higher in the rear.
To Next Page
Loading...
