To Next Page

To Previous Page

Charging the Batteries

Use the provided charger to fully charge the Intelligent Flight Battery before first time use. Charge

the remote controller via the USB-C port using the provided charger.

Preparing the Remote Controller

1. Attach the control sticks.

2. Pull out the mobile device holder, and then unplug the end with mobile phone mark of the RC

cable.

3. Place the mobile device onto the mobile device holder, and plug the RC cable into the mobile

device.

Questions and Answers:

Need help?

Do you have a question about the dji 2S and is the answer not in the manual?

dji 2S Specifications

General

Weight	595 g
Max Flight Time	31 minutes
Max Bitrate	150 Mbps
Effective Pixels	20 MP
Camera Sensor	1" CMOS
Max Transmission Range	12 km (FCC), 8 km (CE)
Max Speed	19 m/s
Video Resolution	5.4K: 5472×3078 @ 24/25/30 fps 4K: 3840×2160 @ 24/25/30/48/50/60 fps
GNSS	GPS+GLONASS+GALILEO
Operating Temperature Range	0° to 40°C (32° to 104°F)
Charging Time	90 minutes
Hovering Accuracy	Vertical: ±0.1 m (with Vision Positioning) ±0.5 m (with GNSS Positioning) Horizontal: ±0.3 m (with Vision Positioning) ±1.5 m (with GNSS Positioning)