dji 2S User Manual

DJI Air 2S Quick Start Guide
Aircraft
The DJI
TM
Air 2S features a new folding design and a fully stabilized 3-axis gimbal camera capable
of shooting 4K video and 20 MP photos. DJI signature technologies such as Obstacle Sensing and
Intelligent Flight Modes like ActiveTrack 3.0, Point of Interest (POI) 3.0, QuickShots, and
Advanced Pilot Assistance Systems 4.0, make capturing complex shots effortless and easy. The DJI
Air 2S boasts a maximum flight speed of 42.5 mph (68.4 kph) and a maximum flight time* of 31
minutes.
1. Forward Vision System
2. Propellers
3. Motors
4. Landing Gears (Built-in antennas)
5. Gimbal and Camera
6. Downward Vision System
7. Auxiliary Bottom Light
8. Infrared Sensing System
9. USB-C Port
10. Battery Buckles
11. Front LEDs
12. Aircraft Status Indicators
13. Backward Vision System
14. Intelligent Flight Battery
15. Power Button
16. Battery Level LEDs
17. microSD Card Slot
18. Upward Vision System
Remote Controller
Built into the DJI RC-N1 remote controller is DJI’s long-range transmission technology O-Sync 3.0,

dji 2S Specifications

General

Weight	595 g
Max Flight Time	31 minutes
Max Bitrate	150 Mbps
Effective Pixels	20 MP
Camera Sensor	1" CMOS
Max Transmission Range	12 km (FCC), 8 km (CE)
Max Speed	19 m/s
Video Resolution	5.4K: 5472×3078 @ 24/25/30 fps 4K: 3840×2160 @ 24/25/30/48/50/60 fps
GNSS	GPS+GLONASS+GALILEO
Operating Temperature Range	0° to 40°C (32° to 104°F)
Charging Time	90 minutes
Hovering Accuracy	Vertical: ±0.1 m (with Vision Positioning) ±0.5 m (with GNSS Positioning) Horizontal: ±0.3 m (with Vision Positioning) ±1.5 m (with GNSS Positioning)

Summary

Aircraft Overview

Aircraft Features and Performance

Overview of the DJI Air 2S aircraft, detailing its design, camera capabilities, flight speed, and duration.

Aircraft Components Identification

Getting Started

DJI Fly App Download Instructions

Instructions for downloading the DJI Fly mobile application from app stores or via QR code.

Battery Charging Procedure

Guidance on fully charging the Intelligent Flight Battery and remote controller before first use.

Remote Controller Setup Steps

Pre-Flight Procedures

Powering On and App Launch

Steps to check battery levels, power on the aircraft and controller, and launch the DJI Fly app.

Flight Operations

Automated Takeoff and Landing

Manual Takeoff, Landing, and Control

Instructions for manual takeoff, landing, and controlling the aircraft using the remote controller sticks.

Remote Controller Stick Commands

Compliance and Safety Information

FCC Compliance Notice

RF Exposure Information

Usage Precautions and DAS Values

Battery Safety Warning: Explosion Risk

A critical caution regarding the risk of explosion if the battery is replaced with an incorrect type and proper disposal.