dji AIR 3 Fly More Combo - Basic Flight; Auto Takeoff;Landing

DJI Air 3
User Manual
©
2023 DJI All Rights Reserved.
25
8. Make sure all camera lenses and sensors are clean.
9. Only use genuine DJI parts or parts authorized by DJI. Unauthorized parts may cause the
system to malfunction and compromise ight safety.
10. Make sure the Obstacle Avoidance Action is set in DJI Fly, and the max flight altitude,
max flight distance and RTH altitude are all set properly according to the local laws and
regulations.
Basic Flight
Auto Takeo/Landing
Auto Takeo
Use the Auto Takeo function:
1. Launch DJI Fly and enter the camera view.
2. Complete all steps in the pre-ight checklist.
3. Tap
. If conditions are safe for takeo, press and hold the button to conrm.
4. The aircraft will take o and hover approximately 1.2 m (3.9 ft) above the ground.
Auto Landing
Use the Auto Landing function:
1. Tap
. If conditions are safe for landing, press and hold the button to conrm.
2. Auto landing can be cancelled by tapping
.
3. If the Downward Vision System is working normally, Landing Protection will be enabled.
4. Motors will stop automatically after landing.
• Choose the proper place for landing.