To Next Page

To Previous Page

DJI Goggles 2 User Manual

v1.0

Contents

The goggles only support standard USB-C

protocols and MFI-certified Lightning cables.

Non-standard cables are not supported. If the

devices do not respond after connecting, use

a different data cable and try again.

Linking

Theaircraftmustbelinkedwiththegogglesrst,

followed by the motion controller.

1. Power on the aircraft, goggles, and motion

controller.

2. Press the link button on the goggles. The goggles

will start to beep continually.

3. Press and hold the power button on the aircraft

until the battery level LEDs start to blink in

sequence.

4. Once linking is completed, the battery level LEDs of

the aircraft turn solid and display the battery level,

the goggles stop beeping, and image transmission

can be displayed normally.

Questions and Answers:

Need help?

Do you have a question about the dji GOGGLES 2 and is the answer not in the manual?

dji GOGGLES 2 Specifications

General