To Next Page

To Previous Page

DJI Goggles 2 User Manual

v1.0

Contents

Press the link button on the goggles again to

stop the process if the goggles fail to connect

to the aircraft. Connect the goggles to your

mobile device and run the DJI Fly App, select

Connection Guide and then follow the on-

screen instructions to link. Make sure the

correct aircraft is selected, otherwise the

linking will fail.

5. Press and hold the power button of the aircraft until

the battery level LEDs start to blink in sequence.

6. Press and hold the power button of the motion

controller until it beeps continually and the battery

level LEDs blink in sequence.

7. The motion controller stops beeping once linking is

successful and both the battery level LEDs of the

aircraft and motion controller turn solid and display

the battery level.

The aircraft can be controlled with only one

remotecontroldeviceduringight.Ifyour

aircraft has been linked with multiple remote

controldevices,turnoothercontroldevices

beforeight.

Getting a Clear Vision

After the devices are powered on and the image

transmission is displayed, wear the goggles and

adjusttheheadbanduntilthegogglestcomfortably.

Then use the knobs to adjust the distances between

Questions and Answers:

Need help?

Do you have a question about the dji GOGGLES 2 and is the answer not in the manual?

dji GOGGLES 2 Specifications

General