3
EN
Propeller adapters, retaining rings and propeller mounting plates
marked with CW should be mounted on motors marked CW, and those
marked with CCW should be mounted on motors marked CCW.
The red spring pad must be mounted on CW motors, and the silver
one on CCW motors. DO NOT mix them.
Put the screws and other parts in the correct places during installation
and removal.
Apply LOCTITE 243 adhesive for secure installation.
Using mismatched screwdrivers will lead to screws with stripped
heads that won't be able to tighten.
1. Remove the screws securing the original propeller mounting plate on the
motors, and then remove the original propeller mounting plate and the spring
pad.
Propeller mounting plate
Spring pad
2. Insert the included screws and tighten to secure the propeller adapter on the
motor. To better secure the propeller adapter, apply LOCTITE 243 adhesive
onto the screws.
Propeller adapter
To Next Page
Loading...
