Why is my dji Drone & Quadcopter Accessories battery not charging?
If the battery isn't charging, verify that the charger you are using is functioning correctly. Try using a different outlet. If the charger isn't functional, replace it. If the battery is not functional, replace the battery.
What to do if my dji M200 battery will not hold a charge?
If the battery will not hold a charge, replace the battery.
What to do if my dji M200 unit does not power on?
If your unit isn't powering on, first ensure the power switch is fully engaged. Next, check that the battery is properly connected. Finally, verify that the battery is fully charged.
What to do if the servo does not move on my dji M200 Drone & Quadcopter Accessories?
If the servo isn't moving, check that the pin arm is not obstructed. Also, check that the unit is powered on. Finally, check that the servo power and data cables are not pinched or damaged.
What to do if the servo cannot fully extend or retract on my dji Drone & Quadcopter Accessories?
If the servo cannot fully extend or retract, check that the payload pin is not obstructed and that the servo arm is not obstructed. Also, ensure that the battery is fully charged and that your payload isn't too heavy for the servo (max recommended weight: 2 lbs/0.9 kg).
What to do if the servo does not open on my dji M200 Drone & Quadcopter Accessories?
If the servo does not open, first check that the unit is powered on. Then, ensure that the Navigation LED of your aircraft is functioning; it must be on for the servo to open. Finally, check that there is no debris covering the light sensor in the light sensor cavity.
What to do if my dji Drone & Quadcopter Accessories battery is swollen?
If the battery is swollen, responsibly recycle it immediately and do NOT attempt to charge it. Then, replace the battery.
What to do if the servo does not close on my dji Drone & Quadcopter Accessories?
If the servo does not close, check that the unit is powered on. Ensure that the Navigation LED of your aircraft is functioning; the LED must be off for the servo to close. Also, check that there is no light leaking into the light sensor cavity.
Why is my dji M200 aircraft hovering upwards after attaching a payload?
If the aircraft begins hovering upwards after attaching a payload, check that there are no objects in close proximity to the downward vision system. Also, ensure that you have at least 1 metre/~3 feet of clearance between the aircraft’s downward vision system and the payload.
Why is my dji Drone & Quadcopter Accessories servo extending and retracting at random?
If the servo extends and retracts at random, check that there is no light leaking into the light sensor cavity. Also, only power the unit on when attached to the aircraft.
Lists all items included with the drop system assembly, such as batteries and accessories.
General| Satellite Positioning Systems | GPS, GLONASS |
|---|---|
| IP Rating | IP43 |
| Supported Gimbal | Zenmuse X4S, Zenmuse X5S, Zenmuse Z30 |
| Operating Temperature | -20°C to 50°C |
| Weight | 4.2 kg (with battery and propellers) |
| Max Ascent Speed | 5 m/s (S-mode) |
| Max Descent Speed | 3 m/s (S-mode), 3 m/s (P-mode) |
| Max Speed | 44.7 mph / 20 m/s |
| Max Flight Time | 38 minutes |
| Max Hovering Time | 32 minutes (with TB55 battery) |
| Max Flight Distance | 7 km |
| Operating Temperature Range | -20°C to 50°C |
| Hovering Accuracy Range | 0.5 m |
To Next Page
