3
EN
Inspire 2
The INSPIRE
TM
2 is a powerful aerial film making system with class leading agility and speed, redundancy
features for maximum reliability, and new, smart features that make capturing complex shots easy. A new
airframe design together with dual batteries boost ight time to 25* minutes and ight speed to 108kph*.
The camera unit is now independent from image processor so that you have the exibility to choose the perfect
gimbal and camera** system for each of your scenes. This means that regardless of which camera you choose,
you have the same powerful processing backing it, and when using the Zenmuse X5S, the ability to capture
RAW videos.
1. FPV Camera
2. Forward Vision System
3. DJI
TM
Gimbal Connector
V2.0 (DGC2.0)
4. Gimbal and Camera
Detach Button
5. Downward Vision System
6. Extended Device Mounting
Position
7. Transformation Mechanism
8. Control and Processing
Center (with SD Card Slot)
9. Front LEDs
* Maximum ight speed and run time are tested in a lab environment. Performance may vary depending on local conditions.
** Gimbal and camera purchased separately on the ofcial DJI Online Store.
*** Lossless video (in CinemaDNG and ProRes format), and DNG RAW photo burst shooting will be available when DJI CINESSD used. Purchase the
DJI CINESSD and DJI CINESSD STATION separately on the ofcial DJI Online Store.
Travel Mode
Flight Mode
Landing
Gear Down
Landing Mode
Landing
Gear Up
10. Propulsion System (with
Motors, Propellers, etc.)
11. Rear LEDs
12. Intelligent Flight Batteries
13. Power Button
14. Battery Level Indicators
15. Battery Remove Button
16. Upward Infrared Sensor
17. Aircraft Status Indicator
18. DJI CINESSD
TM
Slot***
19. Linking Button
20. USB Mode Switch
21. USB Port
19
2
0
21
1
11
12
2
5
10
9
7
6
13
14
16
15
18
17
3
4
8
To Next Page
Loading...
Need help?
General
