4
EN
10
4
9
8
5
6
1
3
7
2
Remote Controller
The Inspire 2 remote controller features DJI’s LIGHTBRIDGE
TM
technology for a maximum transmission distance
of up to 4.3 mi (7km)*. While ying the aircraft, you have a live HD view directly within the DJI GO
TM
4 app on your
paired device for a precise and responsive ying experience. When in dual remote controller mode, each of the
two remote controllers separately control aircraft and camera and can be up to 328 feet (100m) apart.
The maximum run-time of the remote controller’s LiPo battery is approx. four hours**.
11. Control Dial (Gimbal/FPV/Zoom)
12. Camera Settings Dial
13. Record Button
14. Flight Mode Switch
15. Shutter Button
16. Pause Button
17. Micro USB Port
18. CAN Bus (Extended Port)
19. HDMI A Port (for Video Output)
20. USB Port (for Mobile Device Connection)
21. C1 Button
22. C2 Button
1. Power Button
2. Transformation Switch
3. Return-to-Home (RTH) Button
4. Control Sticks
5. Status LED
6. Battery Level LEDs
7. Power Port
8. Mobile Device Holder
9. Antennas
10. Handle Bar
Folded
Connect your
mobile device
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic interference, and
at an altitude of about 400 feet (120 meters).
** Maximum run-time is tested without supplying power for the external mobile device.
17 18 19
20
11
14
13
12
1615
2221
To Next Page
Loading...
Need help?
General
