dji Inspire 2 L

©
2016 DJI All Rights Reserved.
7
EN
3. Run the firmware update program. Press the update button and wait for the
process to nish.
4. The Charging Hub will automatically restart when the update has been successfully
completed.
5. Repeat this process if the rmware update fails for any reason.
— Solid Yellow Ready to charge
Buzzer Beeping Description
Toggle the buzzer switch to turn on/off the warning sound.
Descriptions Beeping Pattern
Toggle the buzzer switch to turn it on Quick beeping
Connect to the Battery Charger Quick beeping
A battery pair is fully charged Quick beeping
Four Intelligent Flight Batteries are fully charged
Alternating two short and one
long beeps, last for about 1 hour
Updating the Firmware
DJI will release rmware updates when available. Refer to the ofcial DJI website and
follow the instructions below to update the rmware.
1. Download the latest rmware update program from the ofcial DJI website.
(http://www.dji.com/inspire-2/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using a Micro USB
cable.