dji Matrice 100 - Optional Battery Compartment Mounting

10
©
2016 DJI. All Rights Reserved.
receives an incoming call. Do NOT accept phone calls during ight.
3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related
regulations in your area. You are solely responsible for being aware of all relevant regulations and ying in
a way that is compliant.
a. Read and understand the warning messages before using the Auto-take off and Auto-landing features.
b. Read and understand the warning messages before re-setting your Home Point.
c. Read and understand the warning messages and disclaimer before setting the altitude beyond the
default limit.
d. Read and understand the warning messages and disclaimer before switching between ight modes.
4. Land your aircraft immediately if there is an alert shown on the app.
5. Examine and check all warning messages on the checklist displayed in the app prior to each ight.
6. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do not
have sufcient experience to be comfortable operating the aircraft.
7. Beginner Mode is enabled by default when you launch the DJI GO app for the rst time. The aircraft’s
altitude and ight distance is restricted when ying in Beginner Mode. We recommend you y in Beginner
Mode to perfect your ight skills. Operate the actual aircraft only after you are condent that you have
mastered adequate ight skills.
8. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before
each ight.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1.
Keep children and animals at a safe distance during any rmware upgrade, system calibration, and
parameter setting procedures.
1. For safety, always update the rmware to the latest version when an upgrade notication is shown in the
DJI GO app.
2. Firmware upgrade notifications will prompt you to proceed with an update immediately or to update
the rmware within three days. If you choose to ignore the current rmware update, you are required
to accept the prompted disclaimer. You further understand and agree that the data including but not
limited to ight telemetry data and user selection records may be uploaded to and maintained on a DJI-
designated server.
3. Only use ofcial DJI rmware. Verify the le integrity of the rmware package downloaded from the ofcial
DJI website (http://www.dji.com) before upgrading.
4. Be sure to update the remote controller’s firmware to the latest version after you update the aircraft’s
rmware.
5. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller
and aircraft.
6. Be sure to check all connections and remove the propellers from the motors before performing the
rmware update.
7. Ensure there is only one rmware package le stored on your SD card.
8. Only storage devices that are formatted for FAT32 and exFAT file systems are supported for aircraft
rmware updates.