dji Matrice 100 - Before You Begin; Individual Parts; Regarding Genuine and Functional Parts; Remote Controller

6
©
2016 DJI. All Rights Reserved.
Before You Begin
The following documents have been produced to help you safely operate and make full use of your DJI
Matrice 100:
DJI Matrice 100 In the Box
DJI Matrice 100 Disclaimer and Safety Guidelines
DJI Matrice 100 Intelligent Flight Battery Safety Guidelines
DJI Matrice 100 User Manual
Check to see that you have all of the components listed in the DJI Matrice 100 In the Box document.
Before assembly, read the
DJI Matrice 100 Disclaimer and Safety Guidelines . Complete the assembly
with the help of the
DJI Matrice 100 User Manual and the video tutorial on the DJI website (http://www.dji.
com). For more information, please refer to the
DJI Matrice 100 User Manual available on the DJI website.
Make sure you fully understand the functionality of each individual part, the ight condition requirements,
the key contingency warning functions/systems, and all government regulations before each ight. If you
have any questions or problems during the assembly, maintenance or use of this product, please contact
DJI or a DJI authorized dealer.
Individual Parts
Regarding Genuine and Functional Parts
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI
certied manufacturers may cause system malfunctions and compromise safety.
2.
Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its
components.
3.
Ensure the aircraft and its components – including but not limited to the remote controller, GPS
module, compass, propulsion system, and battery – are all in good working order, damage-free,
and functioning well. Refer to the remaining sections in this document for more details on how to
ensure the functionality of these components.
Remote Controller
1. Ensure the remote controller is fully charged before each ight.
2. If the remote controller is powered on and has NOT been used for 5 minutes, it will sound an alert. After 10
minutes it will automatically power off. Move the sticks or perform some other action to cancel the alert.
3. Adjust the clamp of the mobile device holder to allow a rm grip on your mobile device.
4. Ensure the mobile device holder is rmly in place and does not slip.
5. Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to achieve
optimal transmission quality.
6. Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly
decrease performance.
7. For the GPS in the remote controller to function properly and the Dynamic Home Point to be accurate,
ensure the DJI logo is facing the sky and keep the remote controller away from any metal objects.
8. Linking is required if you wish to replace your remote controller or receiver or add a new remote controller.
Refer to the User Manual for details.