●
For more information about how to connect and use the remote controller, please refer to the user manual of the Matrice 600 Pro.
●
You can change the stick mode in the DJI GO app.
U
P
D
o
w
n
T
u
r
n
R
i
g
h
t
T
u
r
n
L
e
f
t
F
o
r
w
a
r
d
B
a
c
k
w
a
r
d
R
i
g
h
t
L
e
f
t
Left Stick
Right Stick Gimbal Dial
The MATRICE
TM
600 Pro is equipped with a dedicated DJI
TM
A3 Pro triple-modular redundancy system and advanced intelligent
flight functions, ensuring safe and stable operation at all times. With six Intelligent Flight Batteries, the Matrice 600 Pro has
32 minutes of hover time*. Its mechanical design, with quick-release landing gear and mounted folding arms, make it easy to
transport, store, and prepare for flight.
The standard DJI Hex Charger can charge up to six Intelligent Flight Batteries and two remote controllers simultaneously.
The Matrice 600 Pro is compatible with many of DJI’s gimbals* and has retractable landing gear, allowing for clear
360-degree views from your camera. With a no-payload weight* of 9.5 kg, and maximum takeoff weight of 15.5 kg, the
Matrice 600 Pro can meet specific needs across a range of industries.
Matrice 600 Pro
V1.0
Quick Start Guide
MATRICE 600 PRO
www.dji.com
MATRICE 600 PRO
The maximum transmission distance of the Matrice 600 Pro remote controller is 16,400 feet (5 km)*. The built-in LiPo
battery powers the device for up to four hours* in between charges. An ergonomic design puts gimbal (optional) control
functions within comfortable reach, crucial when operating the aircraft. Important controls such as raising and lowering
the landing gear and activating the Return-to-Home procedure can also be triggered with a tap of a button.
The LIGHTBRIDGE
TM
2 HD video downlink is integrated into the remote controller, allowing real-time camera footage to be
displayed in the DJI GO
TM
app. Dual remote controller mode makes it possible for the aircraft and camera to be operated
on two separate controls, which have a communication range of up to 50 meters.
1. Power Button
2. Landing Gear Control Switch
3. Return-to-Home (RTH) Button
4. Control Sticks
5. Status LED
6. Battery Level LEDs
7. Power Port
8. Mobile Device Holder
9. Antennas
10. Handle Bar
11. Gimbal Dial
12. Camera Settings Dial
13. Record Button
14. Flight Mode Switch
15. Shutter Button
16. Playback Button
17. Micro USB Port
18. SDI Port
19. HDMI
TM
Port
20. USB Port
21. C1 Button
22. C2 Button
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at an altitude
of about 400 feet (120 meters). The maximum run-time is tested under laboratory environment, only for your reference.
* Hover time is based on flying 10 meters above sea level in no-wind conditions and landing with a 10% battery level using six TB47S Intelligent Flight Batteries.
Please refer to Specifications for more information on compatible DJI gimbal models. No-payload weight includes landing gear and six TB47S Intelligent
Flight Batteries.
Remote Controller
5
10
4
9
8
6
1
3
7
2
17
18
19
20
11
14
13
12
1615
21 22
The stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft’s elevation and heading.
The right stick controls the aircraft’s forward, backward and lateral movements. The gimbal dial controls camera tilt or pan.
1. GPS-Compass Pro
2. Center Frame
3. Frame Arms
4. Motors
5. Propellers
6. ESC LEDs
7. Landing Gear
8. Intelligent Flight Batteries
9. Power Button
10. Battery Level LEDs
11. Antennas
12. Aircraft Status Indicator
13. Micro USB Port
The Matrice 600 Pro folded without landing gear.
Folded
8
11
1
2
3
4
5
6
7
9
10
12
13
To Next Page
Need help?
General
Weight and Dimensions
