1.3 Set mission property
•
Click the "2. Set mission property" button to enter the setting interface
•
Waypoint mission setting
1. Head mode：POINT TO NEXT WAYPOINT、USING INITIAL DIRECTION、CON-
TROL BY REMOTE CONTROLLER、USING WAYPOINT HEADING
2. Finish Action：NO ACTION、GO HOME、AUTO LAND、GO FIRST WAYPOINT、
CONTINUE UNTIL END
3. Path Mode：NORMAL、CURVED
4. Gimbal pitch Mode：POINTING TO WAYPOINT、INTEROLATION
5. Speed：- +
•
After setting, click "close" to close the setting window, and click ">" to enter the waypoint
editing window
To Next Page
Loading...
