dji O3 Air Unit - Installation and Wearing

©
2022 DJI All Rights Reserved.
17
DJI O3 Air Unit
User Manual
Installation and Wearing
1. Unfold the antennas.
56 - 72 mm
-0.8 D
- +2.0D
Fold the antennas to avoid damage when the goggles are not in use
2. Remove the screen protector.
Re-attach the screen protector after use to protect the lens and prevent damage caused by
direct sunlight.
3. Attach the headband to the goggles.
4. After the devices are powered on and the image transmission is displayed, wear the goggles and
adjust the headband until the goggles t comfortably.