dji O3 Air Unit - Page 30

28
©
2022 DJI All Rights Reserved.
DJI O3 Air Unit
User Manual
2. Use an H1.5 hex key to adjust the resistance of the stick and recenter the stick vertically. The control
resistance increases when the F1 screw is tightened, and the control resistance decreases when
the F1 screw is loosened. The recentering is disabled when the F2 screw is tightened, and the
recentering is enabled when the F2 screw is loosened.
1
2 3 4
3. Reattach the rubber grip once the adjustment is complete.
1
F1 Right Stick Resistance Adjustment
Screw (Vertical)
2
F2 Right Stick Center Adjustment
Screw (Vertical)
3
F1 Left Stick Resistance Adjustment
Screw (Vertical)
4
F2 Left Stick Center Adjustment
Screw (Vertical)