dji OSMO MOBILE - Upgrading the Firmware; How to Upgrade

18
©
2016 DJI All Rights Reserved.
Upgrading the Firmware
Ensure that the battery has at least 50% power. It will take approximately 10 minutes to
complete the upgrade. The camera status indicator will become solid green when the
mSNXBSFVQHSBEFJTTVDDFTTGVM
How to Upgrade
Connect the Osmo Mobile to your mobile device and then launch the DJI GO app. You will
CFSFNJOEFEJGBOFXmSNXBSFVQHSBEFJTBWBJMBCMF5PTUBSUVQHSBEJOHDPOOFDUZPVSNPCJMF
device to the internet and follow the on-screen instructions.
Do not exit the DJI GO app during the upgrade process. Pay attention to on-screen pop-ups.
You should reattempt the upgrade if the upgrade is unsuccessful.
6SHFLÀFDWLRQV
Handle
Dimensions 2.4×1.9×6.4 inch (61.8×48.2×161.5 mm)
Weight (battery included) 201 g
Gimbal
Name Zenmuse M1
Model ZM01
Dimensions 4.92×4.29×3.57 inch (Folded) (125.06×109.15×90.98 mm)
Weight 300 g
Consumption 2.5 W
Angular Vibration Range ±0.03°
Controllable Range Pan: ±150° ; Roll: ±25° ; Tilt: -125° to +35°
Mechanical Range Pan: ±165° ; Roll: -50° to +90° ; Tilt: -140° to +50°
Max Controllable Speed 120°/s
Mobile Phone Width Range 2.31-3.34 inch (58.6-84.8 mm)
Wireless
Model Bluetooth Low Energy 4.0
Intelligent Battery
Model HB01-522365
Type LiPo
Capacity 980 mAh
Energy 10.8 Wh
Voltage 11.1 V
Charging Temperature 5° to 40° C (41° to 104° F)
Operating Temperature 0° to 40° C (32° to 104° F)