dji OT-213 - Status LED Descriptions; Connection Status LED Descriptions; Charging Status LED Descriptions

6
Status LED Descriptions
Refer to the table below for more information.
Connection Status LED Descriptions (Located on Top)
Connected with External
Microphone
Blinking Pattern Description
No
Blinks green
rapidly
Linking with a device
Solid green
Connected to the Do-It-
All Handle or Wireless
Microphone Receiver
Blinks green
slowly
Failed to connect with the
Do-It-All Handle or Wireless
Microphone Receiver, or
exceeded the transmission
distance
Yes
Blinks yellow
rapidly
Linking with a device
Solid yellow
Connected with the Do-
It-All Handle or Wireless
Microphone Receiver
Blinks yellow
slowly
Failed to connect with the
Do-It-All Handle or Wireless
Microphone Receiver, or
exceeded the transmission
distance
Charging Status LED Descriptions (Located on Bottom)
Status
Blinking Pattern
Descriptions
Battery Level Display
Solid green
15-100%
Solid red
5-15%
Blinks red slowly
0-5%
Charging the
Wireless Mic
Blinks green
0-25%
Blinks green twice
25-50%
Blinks green three times
50-75%
Blinks green four times
75-100%
Solid green for 6 seconds
and turns off
Fully charged