MOUNTING: OPTION #2 Bottom of DRONE
CONFIGURING YOUR REMOTE:
DANGER: If your drone has a BOTTOM MOUNTED vision system sensors you MUST Deactivate them when using
the DRONE RETRIEVE.
MOUNTING: The Drone Retriever can be mounted to the Bottom of Drone with Dual Lock removable fasteners.
ADDITIONALLY you should use the releasable Ziptie to insure reliable attachment in the event of a battery retention
failure. The Ziptie should fit snuggly around the body of the drone. DO NOT over tighten. Insure that the tail of the
Ziptie does not interfere with the propellars
To Previous Page
Loading...
