To Next Page

To Previous Page

① Please refer to the Specications for details on supported aircraft.

② The Smart Controller can reach its maximum transmission distance (FCC) in a wide open area with

no electromagnetic interference using a MAVIC

2 at an altitude of about 100 meters.

③ The maximum working time was tested in a lab environment and is for reference only.

④ A pair of sticks are stocked in the Sticks Storage Slot before delivery. In the illustrations used in the

overview section, the sticks have already been mounted on the Smart Controller.

1. Battery Level and Charging

Press the power button once to check

the battery level.

Press and hold for two seconds or

press for a few seconds to power on

the Smart Controller.

Low

It takes about two hours to fully charge the Smart

Controller using the standard USB power adapter.

• Please use the ofcial USB power adapter to charge the Smart Controller. When a

standard USB power adapter is not available, it is recommended to use an FCC/

CE certied USB power adapter rated 12V/2A.

• Please recharge the battery at least every three months to prevent over

discharging - the battery will deplete when stored for an extended period.

Power Outlet

100~240 V

USB

Power Adapter

USB-C Cable

HighBattery

Questions and Answers:

Need help?

Do you have a question about the dji RM500 and is the answer not in the manual?

dji RM500 Specifications

General