46
It can be observed through the FPV window:
9. Set servo No. (1) to rotate to (90)°
(1) Description: Set a specified servo (No.) to rotate to a set angle. If the set angle is a positive value, the servo rotates clockwise;
if the set angle is a negative value, the servo rotates counterclockwise.
(2) Type: Execution block
(3) Example: Pendulum
Make a pendulum using a servo, a servo gear, and adhesive tape, then control the servo so that it rotates back and forth between
-45° and 45°.
To Next Page
Loading...
