dji RONIN-M - Specifications

©
2015 DJI. All Rights Reserved.
35
Specications
General
Built-In Functions
Three Operation Modes
Underslung Mode
Upright Mode
Briefcase Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive
Motors with Encoders
Bluetooth Module
USB Connection
2.4 GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP
Processor
D-Bus Receiver Supported
Peripheral
Camera Tray Dimensions
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of the camera base plate: 195mm
Maximum width: 160 mm
Accessory Power
Connections
12V Regulated P-Tap x 2; USB 500mW x 1; DJI Lightbridge x 1
GCU Input Power 4 S Ronin-M Battery
Connections 2.4GHz Remote Control; Bluetooth 4.0; USB 2.0
PC
/
MAC Assistant Software
Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit); Mac OS X
10.9 or above
Mobile Assistant Software
Requirements
Mobile Device: iOS 6.1 or above, Android 4.3 or above
Mechanical & Electrical Characteristics
Working Current
Static current: 300 mA (@16 V)
Dynamic current: 600 mA (@16 V)
Locked motor current: Max 10 A (@16 V)
Operating Temperature -15 °C ~ 50 °C (-5 °F ~ 120 °F)
Weight 2.3 kg (5.07 lb) fully loaded with handlebar
Gimbal Dimensions 500 mm (W) x 210 mm (D) x 420 mm (H)
Working Performance
Load Weight Capacity
(Reference Value)
3.6 kg (8 lb)
Angular Vibration Range ± 0.02°
Maximum Control
Rotation Speed
Pan axis: 90°/sec; Tilt axis: 100°/sec; Roll axis: 30°/sec
Mechanical Endpoint Range
Pan axis: 360°
Tilt axis: 105° Up, 190° Down
Roll axis: ± 110°
Controlled Rotation Range
Pan axis control: 360
°
Tilt axis control: Up 105
°
to Down 190
°
Roll axis control: ± 25
°
Specications