dji RS 3 User Manual

DJI RS 3 Quick Start Guide
Introduction
DJI RS 3 is a professional single-handed 3-axis gimbal specifically designed for DSLR and
mirrorless cameras. Users can calibrate the gimbal and set parameters on the screen and use
the onboard buttons to control the gimbal and switch profiles and working modes.
When used with the provided camera control cables, DJI RS 3 can also control the camera
focus, shutter, and recording. The grip has a built-in battery. After connecting to the Ronin
app, it is easy to control gimbal movement and parameter settings with intelligent functions.
1. Touchscreen
2. Joystick
3. Grip (Built-in battery with 1/4”-20 screw hole)
4. Camera Control Button
5. M Button
6. Power Button
7. Gimbal Mode Switch
8. Ronin Series Accessories (RSA)/NATO Ports

dji RS 3 Specifications

General

Product type	-
Product color	Black
Packaging content	Gimbal BG21 Grip Lens-Fastening Support Extended Grip/Tripod (Plastic) Quick-Release Plate (Arca-Swiss/Manfrotto) Multi-Camera Control Cable (USB-C, 30 cm) Screw Kit USB-C Charging Cable (40 cm)
Quantity per pack	- pc(s)
Brand compatibility	DJI

Summary

Getting Started

Downloading the DJI Ronin App

How to download and install the DJI Ronin mobile application.

Mounting the Camera

Camera Attachment Steps

Gimbal Balancing

Vertical Tilt Balancing

Procedure to balance the vertical tilt of the gimbal.

Balancing Procedures

Tilt Axis Depth Balancing

Procedure to balance the tilt axis depth.

Roll Axis Balancing

Procedure to balance the roll axis.

Pan Axis Balancing

Operation and Controls

Touch Screen Interface

Button Functions

Firmware Update

Updating the Gimbal Firmware