dji Ronin-S - Getting Started and Setup; Mounting the Grip and Camera

EN
6
©
2018 DJI OSMO All Rights Reserved.
RONIN-S Quick Start Guide
2. Balancing Depth for the Tilt Axis
a. Rotatethetiltaxissothatthecameralensispointingforward.Holdthetiltmotortocheckifthe
cameraistoporbottomheavy.
b. Togglethelever
1
totheunlockedpositionandloosenthehotshoeknob
2
.Adjustthe
camerabalance
3
untilthecamerastaysstillwhenrotatingthetiltaxis45°upwardsor
downwards.
c. Togglethelever
4
tothelockedposition
5
andtightenthehotshoeknob.
3. Balancing the Roll Axis
a. Releasethetiltmotortocheckthedirectioninwhichthemotorswings.
b. Loosentherollaxisknob
1
andadjustthecamerabalance
2
untilthecamerastaysstillwhen
rotatingthetiltaxis45°totheleftorright.
c. Tightentheknob.
1
3
5
4
2
2
1