dji RS 2 - Balancing Specific Axes; Tilt Axis Depth Balancing; Roll Axis Balancing Procedure

10
DJI RS 2 User Manual
1
2
2. Balancing Depth for the Tilt Axis
a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to
the unlocked position
1
.
b. Check to make sure the camera is not front or back-heavy. If front-heavy, move
the camera backward by turning the knob
2
. If back-heavy, move the camera
forward.
c. Toggle the lever to the locked position. The tilt axis is balanced when the camera
is steady while tilted up or down by 45°.
d. Lock the tilt axis.
1
2
3
3. Balancing the Roll Axis
a. Unlock the roll axis. Toggle the lever on the roll arm to the unlocked position
1
.
b. Check the direction in which the roll motor swings. If the camera rotates to the
left, move the camera to the right
2
. If the camera rotates to the right, move the
camera to the left
2
.
c. Toggle the lever on the roll arm to the locked position. The roll axis is balanced
when the camera is steady.
d. Lock the roll axis.