dji RS 2 - Camera Mounting Details; Lower Quick-Release Plate Attachment; Attaching Camera to Gimbal

8
DJI RS 2 User Manual
A camera riser is required when using a focus motor or a small camera with a
large lens, such as a Sony A6400 with the Sony FE 24-70 f2.8 GM lens.
2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap
Toggle the lever on the lower quick-release plate to the unlocked position
1
,
then insert the camera
2
and toggle the lever to the locked position
3
after it is
engaged. Attach the lens-fastening strap to the lower quick-release plate
4
, and
bind the strap to the camera lens
5
. Note that the rubber of the lens-fastening strap
must be directly under the lens.
It is recommended to use the lens-fastening strap when using a long or heavy lens,
and always use the lens-fastening strap before enabling SuperSmooth mode.
To remove the camera from the lower quick-release plate, toggle the lever to the
unlocked position and remove the camera while pressing the safety lock beside the
lever.
Safety Lock
4
3
1
5
2
3. Attach the Camera to the Gimbal
Toggle the lever on the camera mounting plate to the unlocked position
1
and
insert the lower quick-release plate
2
. Toggle the lever to the locked position once
the camera is roughly balanced
3
.
2
1
3