dji SPARK Manual

Mission Configuration Menu
These options will affect the entire mission:
Action After Finished: by default it is "RTH", so
you do not have to add waypoints to go back.
The waypoint Behaviour:
“Stop on each” will allow to define waypoint
action (such as take pic, start/stop recording) ,
“Continuous Flight” you will get a more smooth
flight also will allow the “Lock on POI” heading
mode when flight between to waypoint with the
same POI as target.
The POI menu will allow you to define POI
position.
Disconnection Behaviour: by default the mission
will continue independently (only low battery
will automatically stop the mission and start
RTH)
Repeat Mission, you can choose the repeat the
path multiple times

dji SPARK Specifications

Operating Environment

max speed	31 mph (50 kph)
operating temperature	32° to 104° F (0° to 40° C)
charging temperature	41° to 104° F (5° to 40° C)

Camera

sensor	1/2.3” CMOS
effective pixels	12 Megapixels
video recording modes	FHD: 1920×1080 30p

Power

charger input	100-240 V, 50/60 Hz, 0.5 A
charger output	5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity	1480 mAh

Remote Control

operating frequency	2.4G / 5.8G
max transmission distance (Wi-Fi)	100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)	2000 m

Weight and Dimensions

weight	300 g
dimensions	143×143×55 mm