dji T30 - Specifications

EN
10
© 2021

DJI All Rights Reserved.
Specications
Items T30 Spreading System 3.0 T10 Spreading System 3.0
Compatible Aircraft
[1]
Agras T30 Agras T10
Spreading System Weight (inc. spread
tank and fenders)
4.1 kg 3 kg
Spread Tank Volume 40 L 12 L
Spread Tank Internal Load
[2]
40 kg
6 kg
[3]
Compatible Material Diameter 0.5-5 mm
Spreading Range
Varies according to material diameter, spinner disk rotational speed, hopper
outlet size, and flight altitude. For optimal performance, it is recommended
to adjust the corresponding variables to achieve a spreading range of 5-7
meters.
[1] The aircraft firmware must support the spreading system. Check the release notes of the corresponding aircraft on the official
DJI website.
[2] The DJI Agras app will intelligently recommend the payload weight limit for the spread tank according to the current status
and surroundings of the aircraft. Do not exceed the recommended payload weight limit when adding material to the spread
tank. Otherwise, the flight safety may be affected.
[3] Note: the internal load of Japan version of T10 is 10 kg.
This content is subject to change without prior notice.
Download the latest version from
http://www.dji.com/t30