To Next Page

To Previous Page

INSPIRE 1 PRO

User Manual

Press C1 or C2 button to switch from pitch mode to yaw mode. You may use the gimbal dial to pan the

gimbal under yaw mode. Press C1 or C2 again to exit yaw mode.

While pressing the C1 button, turn the gimbal dial to focus the X5 camera manually.

While pressing the C2 button, turn the camera settings dial to ne tune the roll axis of the gimbal.

Using DJI GO App to Control Gimbal

Follow the steps below to use DJI GO app to control the gimbal orientation:

1. Launch DJI GO app, enter “Camera” page.

2. Tap and press on the screen until a blue circle is shown.

3. Slide to control the gimbal orientation within the “Camera” page as shown below.

RC Control Setting

Remote Control Calibration

Stick Mode

Gimbal Pitch/YawC1 C2 Reset gimbal yaw

Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.

Do not change unless familiar with your new mode.

You can customize the C1 and C2 buttons on the back

of the remote controller.

Linking Remote Controller

Safe to Fly (GPS)

P-GPS

H: D:

V.S

M/S

H.S

4.22.3

39M 210M

232M

AF/MF

1/320

4821

4K 24

ISO 100

EV 0F 0 LOG

Other manuals for dji Zenmuse X5

Questions and Answers:

Need help?

Do you have a question about the dji Zenmuse X5 and is the answer not in the manual?

General