—
Set a suitable overall volume.
—
Push CEN + or - button, to adjust the centre speaker’s loudness.
Push SUR + or - button, to adjust the rear speaker’s loudness.
Push SW + or - button, to adjust the subwoofer’s loudness.
6. You can adjust the volume ration between the two front speakers using the
BALANCE buttons.
7. Press the button to silence the sound. The display shows “
MU”. Press
this button again to reactivate the sound.
8. If you want to restore the unit’s initial factory settings, press the RESET
button.
9. Press the button at the R/C panel to switch the unit to STANDBY mode.
The indicator lamp at the front panel turns off. Additionally the display
shows “ ”.
10
To Next Page
