DK2 Power OPC503VK - Step 4: Installing the Vacuum Hose

OPC503VK man. v.210319 | 7
ENGLISH
ASSEMBLY
STEP BY STEP INSTRUCTIONS
STEP 4: OPC503 INSTRUCTIONS • INSTALLING THE VACUUM HOSE
1. Take care to not drop the hardware into the chipper chamber once the back cover is removed.
REMOVE REAR PLATE
INSTALL HOSE AND
HOSE CLAMP
INSTALL THE HOSE
RING
TIGHTEN SECURELY
TIGHTEN HARDWARE
SECURELY
2
5
3
6
4