Fill and empty the Tank
Fig. A
Fig. B
Water level label
116
115
54
32
54
115
____________________________________________________________________________
The amount of water in the Tank simulates the mass when moving an object in water. Changing the
Water Level does not change the resistance, it simply changes the mass which the user is trying to
move.
Increasing the Water Level simulates a heavier load, similarly reducing the Water Level simulates a
lighter load.
The Water Level is adjusted according to one’s personal preference or user type; the resistance is
altered simply by moving faster or slower.
The water level gauge is on the side of the tank. The maximum fill level is 6.
DO NOT FILL ABOVE THE MAXIMUM LEVEL.
_______________________________________________________________________________
Periodic maintenance is required to maintain the condition of the water in the tank. We strongly AD-
VISE USING MUNICIPAL TAP WATER which contains other Chemicals to keep it free from Bacte-
ria and Algae, etc.
The water must be refreshed periodically by adding a Water Purification Tablet provided. On ave-
rage, add one purification tablet every 6 months.
If water discoloration occurs add a purification tablet immediately. If the water does not clear, we
recommend emptying the Tank, flushing it out with clean water, refilling, and adding a purification
tablet.
Only use water purification tablets, such as sodium dichlor (56% chlorine).
NEVER USE POOL CHLORINE (TRICHLOR 90% CHLORINE) OR CHLORINE BLEACH. Use of
these products will void the warranty and damage the product.
To Next Page
Loading...
