Specifications
We follow a policy of continuous advancement in de-
velopment. For this reason all or part of specifications
& designs may be changed without prior notice.
11
XM20 XM40
Number of channels 2 2
Amplifier class AB AB
Power output, 4 ohm (0,1% THD) 2 x 50 W 4 x 50 W
Power output, 4 ohm (1% THD) 2 x 56 W 4 x 56 W
Power output, 2 ohm (0,2% THD) 2 x 70 W 4 x 70 W
Power output, 2 ohm (1% THD) 2 x 80 W 4 x 80 W
Peak power, 2 ohm 2 x 100 W 4 x 100 W
Power output, 4 ohm bridged (1% THD) 1 x 170 W 2 x 170 W
Signal to noise ratio, A-weighted >90 dB >90 dB
Frequency response 20 Hz - 30 kHz 20 Hz - 30 kHz
Input impedance, low level 22 kohm 22 kohm
Input impedance, high level 220 ohm 220 ohm
Input sensitivity 0,25 - 5V 0,25 - 5V
Filter high-pass variable 50 - 500 Hz* 50 - 500 Hz*
Filter low pass variable 50-500 Hz* 50-500 Hz *
* can be switched in/out
Bass EQ @ 50 Hz +6 dB / +12 dB + 6dB / +12 dB
Power consumption, idle 0,4 A 0,5 A
Power consumption, max 25A 50A
Fuse 1 x 25 A 2 x 25 A
Dimensions HxWxD(mm) 46 x 189 x 210 46 x 189 x 322
Dimensions (inch) 1,81 x 7,44 x 8,26 1,81 x 7,44 x 12,67
Weight 2 kg 3 kg
All output power ratings
are RMS Watts @ 14,4
VDC.
The 1% figures are
CEA2006 standard
To Next Page
Loading...
