To Next PageTo Next Page
Need help?Do you have a question about the DMG DEUM.M15SER and is the answer not in the manual?
General| Brand | DMG |
|---|---|
| Model | DEUM.M15SER |
| Category | Media Converter |
| Language | English |
Technical specifications of the encoder for different protocols and interfaces.
Key features and capabilities of the encoder, including protocols and programming.
Details on configuring parallel position inputs for different setups.
Setup for 1-wire per floor configuration of parallel position inputs.
Setup for 1-wire per segment configuration of parallel position inputs.
Configuration for Gray or Binary input protocols for parallel position inputs.
Serial position input configuration using MEA/AUTINOR/TKE protocols.
Wiring and function of indicator and emergency lamp inputs.
Configuration and connection for direction arrow inputs.
Input for trigger signals for gong and voice synthesizer functions.
Connection of an autonomous position sensor kit for floor detection.
Serial bus output for connecting DMG displays, voice synthesizers, and gongs.
Configuration and wiring for the DMG CAN bus output.
Configuration and wiring for the 3-wire serial DMG output.
Explanation of the self-diagnosis LED indicators and their meanings.
Settings for configuring the display output, including character sets.
Procedure to reset the DEUM to its factory default settings.
Restoring the last configuration loaded using the DEUM Coder software.
Overview of custom settings available for the encoder.
Setting the desired offset value for the encoder.
Setting the DEUM according to the installation's protocol type.
Configuration options for arrow display (fixed or scrolling).
Setting the offset mode to negative or positive.
Setting the activation time for the "energy saving" function.
Configuration for the initial display of floor or status information.
Allocation of position inputs and signal inputs to specific functions.
Setting the mode for signal transmission (all active or highest priority).
Setting display delay for signals and floor changes to avoid errors.
List of error codes, their meanings, and troubleshooting information.
