Parameter Description Navigation Values
Default
Value
Configuration
Type of wiring configuration:
-) Standard wire terminals (Car and floors);
-) Serial comm. in the elevator car, 1 line/floor
connectors at floors;
-) Wire terminals in the car, Serial communication
at floors (BDU modules);
-) Serial communication for car and floors
◄► (Choice)
Car & Fl.
STD;
Car SER. /
Fl. RJ45;
Car STD. /
Fl. BDU;
Car SER. /
Fl. BDU
Car SER
/ Fl. RJ45
Type of
control
Type of control for the lift ◄► (Choice)
-SAPB;
-SAPB
record
-SAPB
constant
pressure
-Down
collective;
-Full
Collective;
SAPB;
Drive
Traction type:
-) Traction VVVF
-) Hydraulic – Motor Direct (Dir):
-) Hydraulic – Motor Soft Starter (S-S):
-) Hydraulic – Motor Star Delta (Y-D):
-) Hydraulic – Motor with Inverter (VVF):
◄► (Choice)
Traction
Hydraulic
Dir
Hydraulic S-
S
Hydraulic Y-
D
Hydraulic
VVF
Traction
No. of floors Number of floors of the installation
▲▼
(Increase/Decrease)
2 <-> 16
(std.)
2 <-> 32
(BDU only)
2
To Next Page
Loading...