XR500/XR100 User’s Guide 35User Menu
Note: Your system must have at least one user with user code
authority in order to be able to add or delete user codes. Be
careful not to delete all users with user code authority from your
system. Also, the user code used to enter the user menu to delete
codes cannot be deleted. In other words, you can not delete
yourself.
5. At the USER NUMBER: - option, enter the user number you
want to delete and press COMMAND. The display changes to
USER # DELETED.
6. The display then changes back to USER NUMBER: - allowing
you to delete another user. Press the Back Arrow key twice
to exit the User Menu.
Browser Feature
Refer to Appendix B at the back of this guide for a diagram showing
you how to use the Delete User Codes browser.
Forgive Failure to Exit
Failure to Exit is an Anti-passback violation in which a user assigned
with anti-passback has attempted to re-enter an area that they
did not exit through.
Forgive Failure to Exit removes the anti-passback violation. See
Failed to Exit (Anti-Passback) for more information.
1. After the USER CODES? menu is accessed and ADD DEL CHG
BAT displays, press COMMAND.
2. Select FRGV to forgive the Failure to Exit and press
COMMAND.
3. At the USER NUMBER:- option, enter the user number to
be forgiven and press COMMAND. The User Code Browser
describedinAppendixBcanhelpndtheappropriateuser
by name if you do not know the number.
To clear the FAILURE TO EXIT (Anti-passback) violation for
all users, enter 000 at the USER NUMBER:- option.
4. The keypad displays USER XXXX FORGVN to conrm, then
returns to step 3 for the next user. Press the Back Arrow key
to exit this menu.
To Next Page
Loading...
Need help?
General
