Cleaning
Clean the appliance after every use.
The pot and the non-stick coating basket. Do not use metal kitchen utensils or
abrasive cleaning materials to clean them, as this may damage the non-stick
coating.
1. Remove the mains plug from the wall socket and let the appliance cool down.
Note: Remove the pot to let the Hot-air fryer cool down more quickly.
2. Wipe the outside of the appliance with a moist cloth.
3. Clean the pot and basket with hot water, some washing-up liquid and a non-
abrasive sponge.
You can use degreasing liquid to remove any remaining dirt.
Tip: If dirt is stuck to the basket or the bottom of the pot, fill the pot with hot water
with some washing-up liquid. Put the basket in the pot and let the pot and the basket
soak for approximately 10 minutes.
4. Clean the inside of the appliance with hot water and non-abrasive sponge.
5. Clean the heating element with a cleaning brush to remove any food residues.
Storage
1 Unplug the appliance and let it cool down.
2 Make sure all parts are clean and dry.
Environment
Do not throw away the appliance with the normal household waste when it is exhausted,,
but hand it in at an official collection point for recycling. By doing this, you help to
preserve the environment
Guarantee and service
If you need service or information or if you have a problem, please contact your local
authorized service centre
Troubleshooting
problem Possible cause Solution
The Hot-air fryer
does not work
The appliance is not
plugged in.
Put the mains plug in an earthed wall socket.
You have not set the Set the timer key to the required preparation time to
To Next Page
Loading...
