8
13. Battery charging indicator
14. ALARM/SNOOZE
• Press this button during Power On mode to set the alarms
• To activate the snooze function when the alarm is activated
15. Power ON/OFF Switch
16. DC 5V Jack
17. 3.5mm AUX-IN Jack
Installation
• Read the manual thoroughly before operating the device!
• Choose a suitable location for the device. Suitable locations are dry,
even and anti-slip surfaces on which you may operate the device
easily.
• Make sure there is proper ventilation for the device!
• Remove, if necessary, the protection sheet from the display.
Power supply (Adaptor)
• Insert the grid plug into a properly installed AC socket. Connect the
device with the plug connector by inserting its plug into the DC 5V
jack of the device.
• Make sure the grid voltage corresponds to the figures on the
rating plate.
CAUTION:
• Only use the supplied power adaptor for this device.
• Do not use for other devices.
• Only use the original AC adapter. This adapter has been specially
designed for the built-in battery in order to gradually charge the
battery. Any other adapter can shorten the battery life or can
damage it or the device.
NOTE:
Disconnect from mains power supply during longer periods of non-use.
To Next Page
Loading...