Backlight
Selecting this option will alter the Internet radio’s backlight values.
1. After selecting the ‘Backlight’ menu item, the radio will display its list of three menu modes: ‘Active’,
‘Inactive’ and ‘Standby’. These three states are explained below:
The radio gets into its ‘inactive’ state when there is no user activity for 30 seconds.
The ‘active’ state is when there is user activity.
‘Standby’ is the state when the radio has been turned off.
2. Rotate the knob to highlight the desired menu mode and press SELECT.
3. The radio will now display the current backlight value for this menu mode. You can alter this value by
rotating the knob to increase or decrease it.
WiFi Strength
Selecting this option will display the wireless signal strength.
1. The radio will now display the current wireless signal strength value for this menu mode.
English
22
Configure menu
To Next Page
Loading...
