8
trigger is pressed, the faster the rotation speed.
To switch the machine off, release the On/Off trigger
Reverse-rotation Lever
Important! The machine has to come to a complete stop before the reverse rotation
lever can be used; otherwise the machine may be damaged.
Use the reverse-rotation lever to switch between clockwise (normal) and
anticlockwise rotation or vice-versa. With the reverse-rotation lever in the central
position the trigger switch is locked and cannot be depressed. Put the reverse-
rotation lever in the central position before you put the machine down, to avoid
unintentional starting.
Always remove the battery before carrying out any work on the machine.
Care and cleaning
Keep the ventilation openings clear and clean the product regularly. Clean the
housing only with a damp cloth-do not uses any solvents! Dry thoroughly afterwards.
Caution!
If something unusual occurs during use, switch off the tool and remove the battery.
Inspect and repair the tool before using it again. Repair of the tool must only be
carried out by a qualified repair technician.
Repair or maintenance by unqualified personnel can lead to a risk of injury.
Use only identical spare parts for repairing a tool.
Caution!
Ensure that the batteries are charged using the correct charger recommended by the
manufacturer.
Attention!
After long time storage, the battery capacity will be reduce.
In order to maintain battery capacity, we recommend that only store full charged
batteries and top-up the charge from time to time. They should be stored in a dry and
frost-free place, the ambient temperature should not exceed 40
0
C.
Store the machine, operating instructions and where necessary the accessories in
the original packaging. In this way you will always have all the information and parts
ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
Always keep the machine in dry place.
To Previous Page
Loading...