C-6000i Computerized Jigging Reel User Manual
9
Figure 4
Note: The reel will not work properly if the line does not go through the
slack sensor arm.
A sinker is used at the end of the leader. The reel is factory tested with a
sinker weighing 2Kg. When the line is to be released you only have to throw
the sinker and the leader overboard and then press the MAIN pad to enter
Pay-out state.
Note: The weight of the sinker affects fish sensitivity, so if another weight
than 2Kg is used, the fish sensitivity parameter must be adjusted
accordingly (see section FISH SENSITIVITY on page 16).
To Next Page
Loading...