User Manual C-6000i Computerized Jigging Reel
32
This parameter is also used when the slow pay out feature is used. In that
case this is the lower speed.
JIGPOWER TO HAULPOWER
When the reel detects fish on the line it changes states, from jigging to
hauling. Since fish is detected when jigging upwards the only change is the
power i.e. it is changed from jigging power (see JIGGING POWER on page
17) to hauling power (see HAULING POWER on page 24). In order to
avoid losing the fish off the hooks, the reel increases the power ten times
slower than normally when hauling. This is done the first few meters. The
number of meters that the reel behaves this way is controlled by this
parameter. Each step equals 0.2m. The default value is 25, which equals
5m. The parameter can be varied between 0 and 99, which equals 0 –20m.
TANGLE DETECTION
This parameter, if set to a position other than zero, activates the tangling
detection i.e. the machine will detect if the line is tangled with the line/leader
from next jigging machine.
If the reel cannot start a single downward jig (due to a slack on the line)
many times in a row it is a sign that either the depth is decreasing rapidly or
what is more likely, that two reels on the same boat have their leaders
tangled.
As an example of how it works, lets say that the value is set to 2 (the default
value). Now, the reel is allowed to detect bottom two times in a row
without being able to start a single downward jig (due to slack on the line).
If it happens three times in a row, the reel interprets it as “a tangle” and starts
hauling.
If the parameter is set to a value of zero this feature will be inactive.
JIG STEP SIZE
In some countries a very long jigging length is used. Normally the jigging
length can be varied between 0 and 20 meters (see JIGGING LENGTH on
page 17). If a longer jigging length is required then the step size can be
altered. The default value is 2, which equals 0.2 meters. Each step equals
0.1 meters and the value can be varied between 1 and 99. Hence the step
size can be varied between 0.1 and 9.9 meters and the jigging length between
0.1 and 980 meters.
OWN JIG
The user can record his own jig and store the recording in memories labeled
1 to 5 i.e. he can store five different jigs (recordings). This is done as
follows:
First put the reel to Stop state. Then move the cursor to the icon for the
memory that you are going to store your jig in. It is now ready to record
To Next Page
Loading...