03
3.4 How to ajust height of extension pole
4. How to ride
Warning: There is risk of falling down during
learning, so make sure to wear helmet and
protection kits all the time.
1. Turn on the scooter by press and check the battery
power.
3. Turn off the scooter when finish using the product. .
1. Open the lock buckle of extension pole. 2. Press down height-limit button (the metal bead in
hole of extension pole), and pull extension pole to
the length(3 levels of height for option) to fit rider's
height. When the bead goes into the hole, the
height is fixed.
3. Close the lock buckle
lock buckle
height-limit button
2. Press the accelerator slightly to accelerate.
Loose the accelerator to slow down gradually.
Press the brake handle to stop the scooter.
Do not stop suddenly.
03
3.4 How to ajust height of extension pole
4. How to ride
Warning: There is risk of falling down during
learning, so make sure to wear helmet and
protection kits all the time.
1. Turn on the scooter by press and check the battery
power.
3. Turn off the scooter when finish using the product. .
1. Open the lock buckle of extension pole. 2. Press down height-limit button (the metal bead in
hole of extension pole), and pull extension pole to
the length(3 levels of height for option) to fit rider's
height. When the bead goes into the hole, the
height is fixed.
3. Close the lock buckle
lock buckle
height-limit button
2. Press the accelerator slightly to accelerate.
Loose the accelerator to slow down gradually.
Press the brake handle to stop the scooter.
Do not stop suddenly.
03
3.4 How to ajust height of extension pole
4. How to ride
Warning: There is risk of falling down during
learning, so make sure to wear helmet and
protection kits all the time.
1. Turn on the scooter by press and check the battery
power.
3. Turn off the scooter when finish using the product. .
1. Open the lock buckle of extension pole. 2. Press down height-limit button (the metal bead in
hole of extension pole), and pull extension pole to
the length(3 levels of height for option) to fit rider's
height. When the bead goes into the hole, the
height is fixed.
3. Close the lock buckle
lock buckle
height-limit button
2. Press the accelerator slightly to accelerate.
Loose the accelerator to slow down gradually.
Press the brake handle to stop the scooter.
Do not stop suddenly.
13
Adjusting the height of the handlebar
Spring button
Adjusting the height of the handlebar
1. Open the quick-release me-
chanism of the handlebar.
2. Press the spring
button to set the desired
handlebar height.
The spring button must
engage in one of
the 3 holes in the
frame.
3. Close the quick-release
mechanism and make sure
it is secure.